検索結果
-
今年のな 12月からな 茂原でeLEAPの量産に入るらしいけどな その前にな 10月末に蕪湖市との本契約の発表やな 駄目なら茂原に量産ラインを増設するんかな その方が ええような気もするけどな 知らんけど Japan Display to debut alternative eLEAP OLED displays later this year HDTVtest By Mike Wheatley - 23 April 2024 Japan Display has revealed that its much-vaunted eLEAP OLED technology is ready for mass production, and it will launch its first displays ahead of schedule. It’s aiming to deliver its first products by the end of the year, targeting laptops, smartphones and wearable devices initially. The eLEAP OLED technology is an alternative to regular RGB OLED, LG Display’s WRGB OLED and Samsung Display’s QD-OLED, and it has been created by Japan Display, which is a joint venture between Sony, Toshiba and Hitachi’s display panel-making business. The company first revealed eLEAP OLED back in May 2022, making some impressive claims such as its ability to deliver twice the peak brightness of other OLED variants, twice the efficiency and three-times longer lifespans. The key advantage of Japan Display’s eLEAP is its larger aperture ratio, which refers to how much of the space in each OLED pixel can be used to generate light. The larger the space devoted to producing light, the brighter the pixel will be. With conventional OLED displays, the aperture ratio is a mere 28%, but with eLEAP, Japan Display says it has expanded this to 60%. It's not clear how eLEAP stacks up to the most recent generation of OLED displays, however. The term eLEAP is an abbreviation of the tongue twisting technical verbiage “Environment positive, Lithography with maskless deposition, Extreme long life, low power, and high luminance, Any shape Patterning”. It’s the first OLED display that uses photolithography techniques for maskless deposition, which also contributes to the higher brightness and longer lifespan. The company promised to commence mass production of eLEAP displays in 2025, but today’s announcement indicates that it is well ahead of that original schedule. In a statement, Japan Display explained that it first began test production in October 2023 and is now ramping up for eLEAP mass production at its G6 fab in Mobara, Japan, by December 2024. “The production ramp is well ahead of plan: eight months ahead of launch, JDI has already achieved a production yield of over 60%, underscoring that JDI has successfully overcome the key technical hurdles for launch,” the company stated proudly. “JDI will supply eLEAP for use in a wide array of end-use applications, including smartwatches & wearables, smartphones, notebook PCs, and automotive displays.” The G6 fab in Japan is one of a couple that will ultimately start mass producing eLEAP OLED displays. Last year, Japan Display announced it had formed a strategic alliance with a Chinese display maker called HKC, in order to construct what it says would be “world-class eLeap fabs” in China. FlatPanels HD says HKC has since abandoned the project, but Japan Display plans to press on with what will be an 8.7 Generation plant when it comes online. The facility won’t be ready until 2027 at the earliest, but when it is up and running it will allow the company to manufacture much larger eLEAP OLED panels for TVs. Japan Display said one of its first eLEAP products will be a 14-inch display intended for laptops. It will be based on a “single-stack structure” and be able to hit a peak brightness of 1,600 nits. When using a tandem structure, eLEAP can achieve even higher brightness levels that exceed 3,000 nits, the company said. Japan Display has not yet announced any partnerships, so we will have to wait and see which brands choose to adopt the technology.
-
eLEAP = ViP やな > 業界によると、ビジョノックスはIT製品向けの第8世代有機ELディスプレイ(OLED)技術を垂直蒸着方式で開発する計画を立てているとされています。ビジョノックスは、赤(G)、緑(G)、青(B)のOLEDサブピクセルを同じ層に隣接して蒸着するために、半導体リソグラフィプロセスを使用する「eLEAP」方式を採用したと報じられています。なお、「eLEAP」は、日本のJDI(Japan Display Inc.)の技術名であり、一般的には半導体リソグラフィプロセスを使用してOLEDを蒸着する技術を指すとされています。 茂原のG6ラインで立証済みやな >ビジョノックスは、第6世代のパイロットラインでまず「eLEAP」方式を優先的にテストする予定であり、これにより「eLEAP」の量産可能性に関する業界の疑問が解消されることが期待されています。 工場内でな テストしてる分には勝手やけどな 量産して販売するとなるとな 特許権が必要やで > ビジョノックスはまず、第6世代V3ラインにeLEAPのパイロットラインを構築する計画です。ビジョノックスは、中古の第6世代用垂直蒸着装置を購入してパイロットラインでテストし、成功すれば第8世代の垂直蒸着に進む予定です。 > 中国のビジョノックス(Visionox)は、IT用途向けの第8世代OLEDの > 垂直蒸着技術とeLEAP技術を検討 > 2023年6月2日 The Elec > ビジョノックス(Visionox)は、IT向けの第8世代OLEDの投資を垂直蒸着方式で推進しています。ビジョノックスは、従来の小型OLEDで使用されているFMM(Fine Metal Mask)に代わり、半導体リソグラフィプロセスを使用してOLEDを蒸着する「eLEAP」方式でIT向けの第8世代OLED技術開発を進める計画です。この取り組みに対して、業界ではビジョノックスが「eLEAPは新技術」として注目され、地方政府の投資を引きつけるための戦略であると評価されています。ビジョノックスは、第6世代のパイロットラインでまず「eLEAP」方式を優先的にテストする予定であり、これにより「eLEAP」の量産可能性に関する業界の疑問が解消されることが期待されています。 > > 業界によると、ビジョノックスはIT製品向けの第8世代有機ELディスプレイ(OLED)技術を垂直蒸着方式で開発する計画を立てているとされています。ビジョノックスは、赤(G)、緑(G)、青(B)のOLEDサブピクセルを同じ層に隣接して蒸着するために、半導体リソグラフィプロセスを使用する「eLEAP」方式を採用したと報じられています。なお、「eLEAP」は、日本のJDI(Japan Display Inc.)の技術名であり、一般的には半導体リソグラフィプロセスを使用してOLEDを蒸着する技術を指すとされています。 > > ビジョノックスでは、「eLEAP」技術を「ViP」(Visionox Intelligent Pixelization Technology)と呼んでいます。ビジョノックスによれば、ViP技術の適用により、ピクセル密度1700PP(Pixels Per Inch)以上の実現が可能であり、最大で4倍の明るさ、最大で6倍の製品寿命の向上ができると述べています。現在のハイエンドスマートフォンのピクセル密度は500〜600PPIの水準です。 > > ビジョノックスのViPを含むeLEAP方式は、従来の小型OLEDで使用されているRGBサブピクセル形成の中心であるファインメタルマスク(FMM)を使用しないことが特徴です。FMMは重力の影響でマスクの中央部が下に垂れ下がることがあるため、第6世代OLEDでは薄膜トランジスタ(TFT)プロセス後に基板を半分に切り、蒸着する方法を採用しています。 > > かつてSamsung Displayが垂直蒸着方式で開発したIT向けの第8世代OLED技術は、FMMを使用する方式でした。当時、蒸着装置を開発していた日本のアルバック(Ulvac)が実質的に手を引き、関連開発計画は現在中断されています。 > > ビジョノックスはまず、第6世代V3ラインにeLEAPのパイロットラインを構築する計画です。ビジョノックスは、中古の第6世代用垂直蒸着装置を購入してパイロットラインでテストし、成功すれば第8世代の垂直蒸着に進む予定です。 > > ビジョノックスは、IT向けの第8世代OLEDライン構築に関して、蒸着装置メーカーであるキヤノントッキから、蒸着装置の導入は2027年まで可能であるとの回答を得たと報じられています。 > > ビジョノックスのIT向けの第8世代OLED垂直蒸着の推進に対しては、業界の一部では「新技術として注目されることが必要で地方政府の投資を引きつけることができる」とし、「eLEAP方式はIT向けの第8世代OLED投資の根拠となり得る」との解釈が出されています。 > > 同時に、ビジョノックスのこのような試みは、eLEAPの量産可能性に対する業界の疑問を解消する機会になる可能性があります。去年、日本のJDIがeLEAP技術を公開した後、業界では量産可能性に対して疑念が抱かれています。eLEAPの量産性が確認されれば、従来のOLED産業におけるFMMを中心とした競争にも変化が生じる可能性があります。 > > 先日、キム・ヨンソク ディスプレイ革新工程事業団長は、「韓国のOLED産業はFMMを基盤として画素構造などで特許の壁を築いてきた」と述べ、「韓国のパネルメーカーも半導体露光工程を適用したOLED技術を開発していますが、これらの技術が商業化されればFMM技術の壁がなくなり、韓国のOLED産業に重要な変化が生じる可能性がある」と明らかにしています。
バックプレーン技術のな HMO…
2024/04/26 06:27
バックプレーン技術のな HMOやなUHMOにも注目やで! Samsung and LG have a new OLED rival Allied forces are gunning for the OLED crown. CLUB386 By Blair Jacobs - 25/04/2024 Samsung and LG have been the forerunners of OLED display technology with little to no competition. Fortunately, there’s a new OLED panel maker in town, and it has its sights set on the number one spot. The company, Japan Display (JDI), and its new eLEAP type of OLED panels will enter production by the end of 2024. JDI announced the tech in 2022 with lofty claims that it developed a “historic breakthrough in display technology.” eLEAP is a new manufacturing process developed via a joint venture between Sony, Toshiba, and Hitachi’s display panel divisions. The process is a cost-effective solution that’s used to create freeform OLEDs that are brighter, more efficient, and long-lasting when compared to the OLED panel types on the market today. The breakdown In comparison, JDI claims its OLED variant offers twice the peak brightness, three times the life span, and twice the emission efficiency. This is achieved by its larger aperture ratio and maskless deposition process. The aperture ratio of an OLED pixel determines how much light it can generate. Typical OLED displays have an aperture ratio of about 28%, whereas eLEAP displays offer up to a whopping 60%. On the other hand, today’s OLED panels are produced using Fine-Metal-Mask (FMM) technology. This method has been the remaining bottleneck for the wider application of OLED displays. FMM is a complex and expensive process because it can only be created in an ambient vacuum environment. It is the main reason why OLED displays are so expensive to manufacture. More defects encountered during the process also lead to less product yield and more material waste. The benefits of eLEAP is in its name: environment positive; Lithography with maskless deposition; Extreme long life, low power, and high luminance; Any shape Patterning. Quite the mouthful and not quite a proper acronym. Nevertheless, removing this complex metal masking process allows JDI to create higher-performance OLEDs at a much lower cost. Should Samsung and LG be worried? Well, not quite yet. The display tech is still limited to its smaller 6-Gen substrate line. JDI initially plans to target smaller products like laptops, smartphones, car displays and wearable tech, at least for now. Thereafter, it can scale the process up to its 8-Gen (2200x2500mm) substrate line, which will allow for larger monitors and TVs. If all goes to plan, this will enter mass production by 2027.